METHODS FOR ESTIMATING ON-SITE AMBIENT AIR CONCENTRATIONS AT DISPOSAL SITES
Notice - This site contains archived material(s)
Archive disclaimer
Archive
disclaimer
Archived files are provided for reference
purposes only. These files are no longer maintained by the Agency and may be outdated. For
current EPA information, go to www.epa.gov. It is EPA's policy to
support reasonable accommodation to persons with disabilities, pursuant to the Rehabilitation
Act of 1973, 29 U.S.C. 791. If you need assistance with accessing archived files, contact
EPA's Reasonable Accommodations
or submit a request using the Contact Us form.
Abstract
Currently, Gaussian type dispersion modeling and point source approximation are combined to estimate the ambient air concentrations of pollutants dispersed downwind of an areawide emission source, using the approach of virtual point source approximation. The Gaussian dispersion modeling becomes less accurate as the receptor comes closer to the source, and becomes inapplicable for the estimation of on-site ambient air concentrations at disposal sites. Partial differential equations are solved with appropriate boundary conditions for use in estimating the on-site concentrations in the ambient air impacted by emissions from an area source such as land disposal sites. Two variations of solution techniques are presented, and their predictions are compared.
Citation
Hwang, S. METHODS FOR ESTIMATING ON-SITE AMBIENT AIR CONCENTRATIONS AT DISPOSAL SITES. U.S. Environmental Protection Agency, Washington, D.C., EPA/600/J-87/109 (NTIS PB88132907), 1987.
Additional Information
Pub. in Nuclear and Chemical Waste Management, v7 p95-98 Jun 87.